71.080.60 (Alcohols. Ethers) 标准查询与下载

ASTM D3128-07(2013) 2-甲氧基乙醇的标准规格

1.1 This specification covers 2-methoxyethanol. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 The following applies to all specified limits in this standard; for purposes of determining conformance with this standard, an observed value or a calculated value shall be rounded off “to the nearest unit” in the last right-hand digit used in expressing the specification limit, in accordance with the rounding-off method of Practice E29. 1.4 For hazard information and guidance, see the supplier's Material Safety Data Sheet for materials listed in this specification. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Specification for 2-Methoxyethanol

ASTM E2470-07 聚酯级乙二醇的标准规范

1.1 This specification covers polyester grade ethylene glycol.The following safety hazards caveat pertains only to the test methods portion, Section 5, described in this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. 1.2 Review the current Materials Safety Data Sheets (MSDS) for detailed information concerning toxicity, first aid procedures, handling and safety precautions.1.3 The following applies to all specified limits in this standard; for purposes of determining conformance with this standard, an observed value or a calculated value shall be rounded off "to the nearest unit" in the last right-hand digit used in expressing the specification limit, in accordance with the rounding-off method of Practice E 29.1.4 The values stated in SI units are to be regarded as the standard.

Standard Specification for Polyester Grade Ethylene Glycol

ASTM D330-07(2013) 2-丁氧基乙醇的标准规格

1.1 This specification covers 2-butoxyethanol. 1.2 The following applies to all specified limits in this standard; for purposes of determining conformance with this standard, an observed value or a calculated value shall be rounded off “to the nearest unit” in the last right-hand digit used in expressing the specification limit, in accordance with the rounding-off method of Practice E29. 1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.4 For specific hazard information and guidance, see the supplier's Material Safety Data Sheet for materials listed in this specification.

Standard Specification for 2-Butoxyethanol

ASTM D1969-07(2012) 2-乙基己醇的标准规格

1.1 This specification covers regular and monomer grade 2-ethylhexanol. 1.2 The following applies to all specified limits in this standard; for purposes of determining conformance with this standard, an observed value or a calculated value shall be rounded off ???to the nearest unit??? in the last right-hand digit used in expressing the specification limit, in accordance with the rounding-off method of Practice E29. 1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.4 For specific hazard information and guidance, see the supplier's Material Safety Data Sheet for materials listed in this specification.

Standard Specification for 2-Ethylhexanol

ASTM D1257-07(2012) 高比重甘油的标准规格

1.1 This specification covers high-gravity glycerin (98.7 weight8201;%, minimum) for use in the manufacture of alkyd and other synthetic resins. 1.2 The following applies to all specified limits in this standard; for purposes of determining conformance with this standard, an observed value or a calculated value, shall be rounded off ???to the nearest unit??? in the last right-hand digit used in expressing the specification limit, in accordance with the rounding-off method of Practice E29. 1.3 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.4 For specific hazard information and guidance, see the supplier's Material Safety Data Sheet for materials listed in this specification.

Standard Specification for High-Gravity Glycerin

ASTM D5008-07(2012) 利用气相色谱法测定2-乙基己醇的乙基甲基戊醇含量和纯度值的标准试验方法

1.1 This test method covers the determination of ethyl methyl pentanol content and purity value of 2-ethylhexanol. 1.2 Water and acid cannot be determined by this test method and must be determined in accordance with Test Methods D1613 and E203 and those results used to normalize the chromatographic data. 1.3 For purposes of determining conformance of an observed or a calculated value using this test method to relevant specifications, test result(s) shall be rounded off ???to the nearest unit??? in the last right-hand digit used in expressing the specification limit, in accordance with the rounding-off method of Practice E29. 1.4 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For a specific hazard statement, see 6.1.1. 1.6 For hazard information and guidance, see the supplier's Material Safety Data Sheet.

Standard Test Method for Ethyl Methyl Pentanol Content and Purity Value of 2-Ethylhexanol By Gas Chromatography

ASTM D4837-07(2012) 丙二醇单甲醚标准规格

1.1 This specification covers propylene glycol monomethyl ether (PM). Note 1???Propylene glycol monomethyl ether (PM) is a mixture of two isomers: 1-methoxy-2-propanol and 2-methoxy-1-propanol. 1.2 The following applies to all specified limits in this standard; for purposes of determining conformance with this standard, an observed value or a calculated value shall be rounded off ???to the nearest unit??? in the last right-hand digit used in expressing the specification limit, in accordance with the rounding-off method of Practice E29. 1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.4 For specific hazard information and guidance, consult the supplier's Material Safety Data Sheet for materials listed in this standard.

Standard Specification for Propylene Glycol Monomethyl Ether

ASTM D1257-07 高比重甘油的标准规范

1.1 This specification covers high-gravity glycerin (98.7 weight %, minimum) for use in the manufacture of alkyd and other synthetic resins.1.2 The following applies to all specified limits in this standard; for purposes of determining conformance with this standard, an observed value or a calculated value, shall be rounded off "to the nearest unit" in the last right-hand digit used in expressing the specification limit, in accordance with the rounding-off method of Practice E 29.1.3 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.1.4 For specific hazard information and guidance, see the supplier's Material Safety Data Sheet for materials listed in this specification.

Standard Specification for High-Gravity Glycerin

ASTM D1969-07 2-乙基己醇的标准规范

1.1 This specification covers regular and monomer grade 2-ethylhexanol.1.2 The following applies to all specified limits in this standard; for purposes of determining conformance with this standard, an observed value or a calculated value shall be rounded off "to the nearest unit" in the last right-hand digit used in expressing the specification limit, in accordance with the rounding-off method of Practice E 29.1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.1.4 For specific hazard information and guidance, see the supplier's Material Safety Data Sheet for materials listed in this specification.

Standard Specification for 2-Ethylhexanol

ASTM D330-07 2-丁氧基乙醇的标准规范

1.1 This specification covers 2-butoxyethanol.1.2 The following applies to all specified limits in this standard; for purposes of determining conformance with this standard, an observed value or a calculated value shall be rounded off "to the nearest unit" in the last right-hand digit used in expressing the specification limit, in accordance with the rounding-off method of Practice E 29.1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.1.4 For specific hazard information and guidance, see the supplier's Material Safety Data Sheet for materials listed in this specification.

Standard Specification for 2-Butoxyethanol

ASTM D3128-07 2-甲氧基乙醇的标准规范

1.1 This specification covers 2-methoxyethanol.1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.1.3 The following applies to all specified limits in this standard; for purposes of determining conformance with this standard, an observed value or a calculated value shall be rounded off "to the nearest unit" in the last right-hand digit used in expressing the specification limit, in accordance with the rounding-off method of Practice E 29.1.4 For hazard information and guidance, see the supplier's Material Safety Data Sheet for materials listed in this specification.This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Specification for 2-Methoxyethanol

ASTM D4837-07 丙二醇一甲基醚的标准规范

1.1 This specification covers propylene glycol monomethyl ether (PM). Note 1Propylene glycol monomethyl ether (PM) is a mixture of two isomers: 1-methoxy-2-propanol and 2-methoxy-1-propanol.1.2 The following applies to all specified limits in this standard; for purposes of determining conformance with this standard, an observed value or a calculated value shall be rounded off "to the nearest unit" in the last right-hand digit used in expressing the specification limit, in accordance with the rounding-off method of Practice E 29.1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.1.4 For specific hazard information and guidance, consult the supplier's Material Safety Data Sheet for materials listed in this standard.

Standard Specification for Propylene Glycol Monomethyl Ether

ASTM D3125-06 测定无色单体丙烯酸酯和丙烯酸中氢醌的单甲基醚的标准试验方法

Acrylic acid and its esters are normally inhibited with MEHQ only. This procedure presents a rapid and accurate method of determining the MEHQ content of fresh acrylic acid and acrylate esters in the absence of other inhibitors. MEHQ effectiveness may decline with age and this decline in effectiveness may not be indicated by this test method.1.1 This test method covers the determination of monomethyl ether of hydroquinone (MEHQ) in colorless monomeric acrylate esters and acrylic acid. The test method is applicable to the determination of MEHQ in the concentration range from 0 to 1200 parts per million.1.2 For purposes of determining conformance of an observed or a calculated value using this test method to relevant specifications, test result(s) shall be rounded off "to the nearest unit" in the last right-hand digit used in expressing the specification limit, in accordance with the rounding-off method of Practice E 29.1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.1.4 For hazard information and guidance, see the supplier's Material Safety Data Sheet.1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of whoever uses this standard to consult and establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific precautionary statements are given in Section 8.

Standard Test Method for Monomethyl Ether of Hydroquinone in Colorless Monomeric Acrylate Esters and Acrylic Acid

ASTM D3125-06(2012) 测定无色丙烯酸酯和丙烯酸单体中氢醌单甲基醚的标准试验方法

1.1 This test method covers the determination of monomethyl ether of hydroquinone2 (MEHQ) in colorless monomeric acrylate esters and acrylic acid. The test method is applicable to the determination of MEHQ in the concentration range from 0 to 1200 parts per million. 1.2 For purposes of determining conformance of an observed or a calculated value using this test method to relevant specifications, test result(s) shall be rounded off ???to the nearest unit??? in the last right-hand digit used in expressing the specification limit, in accordance with the rounding-off method of Practice E29. 1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.4 For hazard information and guidance, see the supplier's Material Safety Data Sheet. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of whoever uses this standard to consult and establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific precautionary statements are given in Section 8.

Standard Test Method for Monomethyl Ether of Hydroquinone in Colorless Monomeric Acrylate Esters and Acrylic Acid

ASTM D1719-05 异丁醇标准规范

1.1 This specification covers isobutyl alcohol for use in paint, varnish, lacquer, and related products.1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.1.3 The following applies to all specified limits in this standard; for purposes of determining conformance with this standard, an observed value or a calculated value shall be rounded off "to the nearest unit" in the last right-hand digit used in expressing the specification limit, in accordance with the rounding-off method of Practice E 29.1.4 For specific hazard information and guidance, see the supplier's Material Safety Data Sheets for materials listed in this specification.

Standard Specification for Isobutyl Alcohol

ASTM D5164-05 丙二醇和二丙基丙二醇的标准规范

1.1 This specification covers propylene glycol and dipropylene glycol for use in the preparation of surface coatings.1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.1.3 The following applies to all specified limits in this standard; for purposes of determining conformance with this standard, an observed value or a calculated value shall be rounded off "to the nearest unit" in the last right-hand digit used in expressing the specification limit, in accordance with the rounding-off method of Practice E 29.1.4 For specific hazard information and guidance, see the supplier's Material Safety Data Sheets.

Standard Specification for Propylene Glycol and Dipropylene Glycol

ASTM D331-05 2-乙氧基乙醇的标准规范

1.1 This specification covers 2-ethoxyethanol.1.2 The values stated in SI units are to be regarded as the standard. No other units of measurement are included in this standard.1.3 The following applies to all specified limits in this standard; for purposes of determining conformance with this standard, an observed value or a calculated value shall be rounded off "to the nearest unit" in the last right-hand digit used in expressing the specification limit, in accordance with the rounding-off method of Practice E 29.1.4 For hazard information and guidance, see the supplier's Material Safety Data Sheets.

Standard Specification for 2-Ethoxyethanol

ASTM D770-05 异丙醇的标准规范

1.1 This specification covers isopropyl alcohol (99 % grade). 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.1.3 The following applies to all specified limits in this standard; for purposes of determining conformance with this standard, an observed value or a calculated value shall be rounded off "to the nearest unit" in the last right-hand digit used in expressing the specification limit, in accordance with the rounding-off method of Practice E 29.1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. 1.5 For hazard information and guidance, see the supplier's Material Safety Data Sheet.

Standard Specification for Isopropyl Alcohol

ASTM D3622-05 1-丙醇(正丙醇)的标准规范

1.1 This specification covers n-propyl alcohol (1-propanol) for use in paint, varnish, lacquer and related products.1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.1.3 The following applies to all specified limits in this standard; for purposes of determining conformance with this standard, an observed value or a calculated value shall be rounded off "to the nearest unit" in the last right-hand digit used in expressing the specification limit, in accordance with the rounding-off method of Practice E 29.1.4 For specific hazard information and guidance, see the supplier's Material Safety Data Sheets for materials listed in this specification.

Standard Specification for 1-Propanol (n-Propyl Alcohol)

ASTM D304-05 n-丁醇(丁醇)的标准规范

1.1 This specification covers n-butyl alcohol (butanol).1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are to be included in this standard.1.3 The following applies to all specified limits in this standard; for purposes of determining conformance with this standard, an observed value or a calculated value shall be rounded off "to the nearest unit" in the last right-hand digit used in expressing the specification limit, in accordance with the rounding-off method of Practice E 29.1.4 For hazard information and guidance, see the supplier's Material Safety Data Sheets.

Standard Specification for n-Butyl Alcohol (Butanol)